PM<Subscript>2.5</Subscript> particulates and metallic elements (Ni,Cu, Zn,Cd and Pb) study in a mixed area of summer season in Shalu,Taiwan

PM_2.5 has become an important environmental issue in Taiwan during the past few years. Moreover, electricity increased significantly during the summertime and TTPP generated by coal burning base is the main electricity provider in central Taiwan. Therefore, summer season has become the main research target in this study. The ambient air concentrations of particulate matter PM_2.5 and PM₁₀ collected by using VAPS at a mixed characteristic sampling site were studied in central Taiwan. The results indicated that the average daytime PM_2.5 and PM₁₀ particulate concentrations were occurred in May and they were 44.75 and 57.77 µg/m³ in this study. The results also indicated that the average nighttime PM_2.5 and PM₁₀ particulate concentrations were occurred in June and they were 38.19 and 45.79 µg/m³ in this study. The average PM_2.5/PM₁₀ ratios were 0.7 for daytime, nighttime and 24-h sampling periods in the summer for this study. This value was ranked as the lowest ratios when compared to the other seasons in previous study. Noteworthy, the results further indicated that the metallic element Pb has the mean highest concentrations for 24-h, daytime and nighttime sampling periods when compared to those of the other metallic elements (Ni, Cu, Zn and Cd). The average mean highest metallic Pb concentrations in PM10 were 110.7, 203.0 and 207.2 ng/m³ for 24-h, daytime and nighttime sampling periods in this study. And there were 59.53, 105.2 and 106.6 ng/m³ for Pb in PM2.5 for 24-h, daytime and nighttime sampling periods, respectively. Moreover, the results further indicated that mean metallic element Pb concentrations on PM_2.5 and PM₁₀ were all higher than those of the other elements for 24 h, day and nighttime.     

An automated monitoring of atmospheric mixing height from routine radiosonde profiles over South Korea using a web-based data transfer method

This study describes an effort to estimate atmospheric mixing height using vertical profiles of thermodynamic variables measured operationally at radiosonde sites in South Korea. We focus on mixing height at 06UTC (15LST) when vigorous daytime convection is expected with clear skies. For this purpose, we developed a simple numerical algorithm using a new data transfer tool, known as cURL, to determine mixing height and applied it to radiosonde data at Osan and Gwangju for 2010. Emphasis was placed on automating as much as possible the process of determining mixing height. According to the preliminary results, the estimation algorithm performed successfully for most cases with clear sky conditions and was useful in diagnosing and monitoring daytime mixing heights more effectively on a near-real-time basis. With the developed algorithm, it is possible to estimate mixing heights from radiosonde data within a few hours of the development of the convective boundary layer. Application to radiosonde sites in other countries is straightforward and continued modifications of the algorithm are anticipated in the near future.     

Sensitivity of Simulated Conservation Practice Effectiveness to Representation of Field and In-Stream Processes in the Little River Watershed

Evaluating the effectiveness of conservation practices (CPs) is an important step to achieving efficient and successful water quality management. Watershed-scale simulation models can provide useful and convenient tools for this evaluation, but simulated conservation practice effectiveness should be responsive to parameter values used to represent the practices in the modeling. The objectives of this study were to (1) assess the impacts of a set of conservation practices on hydrology and water quality of a watershed and (2) evaluate the sensitivity of Soil and Water Assessment Tool (SWAT) modeling outputs and simulated conservation practice effectiveness to parameters. The modeling study was conducted in an agricultural watershed, the subwatershed K (16.9 km²) of the Little River Experimental watershed located in the South Atlantic Coastal Plain of the USA. Sensitivity analysis showed that hydrologic response unit (HRU) and watershed-scale simulations for water quality were most sensitive to CN and FILTERW parameters. Load reduction rates as a function of increased aerial coverage of the conservation practices were greatest for total phosphorus (TP), followed by sediment and total nitrogen (TN). The results indicated that conservation practices would have a limited impact on stream flow volume but could have a significant impact on sediment and TP loads within this region. Watershed-scale TN and TP loads were also sensitive to an in-stream nutrient transformation process represented using the QUAL2E algorithm in SWAT. The study clearly demonstrated the most sensitive model parameters and the optimal conservation practices for this watershed.     

The effect of operational parameters on the photocatalytic degradation of pesticide

The photocatalytic degradation of Cartap Hydrochloride, a synthetic pesticide. has been investigated over coated TiO2 photocatalysts irradiated with a ultraviolet (UV) light. The effect of operational parameters, i.e., Cartap Hydrochloride concentration, reaction time, light intensity and additive on the degradation rate of aqueous solution of Cartap Hydrochloride has been examined. Results show that the employment of efficient photocatalysts and the selection of optimal operational parameters may lead to degradation of Cartap Hydrochloride solutions.     

Catalytic wet oxidation of ammonia: why is N2 formed preferentially against NO3 -?

The role of catalyst and the reason for the preferential formation of N(2) in the catalytic oxidation reaction of ammonia in water over a Ru (3wt.%)/TiO(2) catalyst were elucidated. It was verified that the catalyst in the reaction had no direct relevance to the selective formation of N(2), but was responsible only for the oxidation of aqueous ammonia, NH(3)(aq), finally giving a molecule of nitrous acid. The preferential production of N(2) was experimentally demonstrated due to the homogeneous aqueous phase reaction of the nitrous acid-dissociated NO(2)(-) with NH(4)(+) ions. Even under the highly oxidizing condition, NO(2)(-) was much more likely to react with NH(4)(+) to form N(2) than being oxidized over the catalyst to NO(3)(-) as long as NH(4)(+) was available in solution.     

Integrating affective values to sustainable behaviour focused on Kansei engineering

Due to the changes and complications of emerging society, designers are required not only to know about their design values, but also understand the link between their design and the impacts on the users. This paper aims to show a Kansei focused proposition for sustainable behaviour. By investigating the relationship between Subjective Preference (Like-Dislike) and product evaluation, it shows how affective values, which are used in Kansei engineering researches, influence user’s preferences. In this study, it was considering (1) various factors of product (e.g. the view variation and blackness of products), and (2) Reality Sets (Uninominal–Binominal). Car-front-face, car-side, car-multi-aspect (as Uninominal Reality Sets) and combinations of car front and side (as Binominal Reality Sets) were used as stimuli. The experiment consists of item screening and product evaluation. Subjects were participated in both. The aim of item screening was at selecting subjectively preferred/non-preferred images. Images, which were screened through item screening, were reconciliated per subject. The aim of product evaluation was at investigating if Subjective Preference has related to product evaluation. Semantic Differential method was used as product evaluation method. Evaluation values were preference, aesthetic and pleasure. The findings shows: (1) Subjective Preference is related to product evaluation independently in Uninominal Reality Sets, whereas Subjective Preference is related to product evaluation dependently in Binominal Reality Sets (2) partial preferred images influence product evaluation in Uninominal Reality Sets, whereas Binominal Reality Sets do not influence it.     

Characterization and prediction of meandering channel migration in the GIS environment: A case study of the Sabine River in the USA

This study focused on the prediction of a 22 km meandering channel migration of the Sabine River between the states of Texas and Louisiana. The meander characteristics of 12 bends, identified from seven orthophotos taken between 1974 and 2004, were acquired in a GIS environment. Based on that earlier years' data acquisition, channel prediction was performed for the two years 1996 and 2004 using least squares estimation and linear extrapolations, yielding a satisfactory agreement with the observations (the median predicted and observed migration rates were 3.1 and 3.6 [m/year], respectively). The best-predicted migration rate was found to be associated with the longest orthophoto-recorded interval. The study confirmed that channel migration is strongly correlated with bend curvature and that the maximum migration rate of the bend corresponded to a radius of curvature [bend radius (R(C))/channel width (W(C))] of 2.5. In tight bends of a smaller radius of curvature than 1.6, secondary flow scouring near the bend apex increases bend curvature. The stability index of the dimensionless bend radius was determined to be 2.45. Overall, this study proves the effectiveness of least squares estimation with historical orthophotography for characterization of meandering channel migration.     

Next generation guided wave health monitoring for long range inspection of pipes

Shown in this paper are recent accomplishments of robust leading edge technologies in the guided wave technique and the technology transfer to the Gas and Petrochemical Industries. Focusing of guided wave beams is a key for success, compared to conventional axisymmetric excitation. Guided wave scanning and significant sensitivity enhancement are established via the newly implemented focusing scheme. In addition, using both longitudinal and torsional modes is essential to improve sensitivity and reliability in data analysis over the conventional technique based on only longitudinal or torsional. The related theoretical studies and experimental data are also presented along with field test results for confirmation.     

Food waste impact on municipal solid waste angle of internal friction

The impact of food waste content on the municipal solid waste (MSW) friction angle was studied. Using reconstituted fresh MSW specimens with different food waste content (0%, 40%, 58%, and 80%), 48 small-scale (100-mm-diameter) direct shear tests and 12 large-scale (430 mm × 430 mm) direct shear tests were performed. A stress-controlled large-scale direct shear test device allowing approximately 170-mm sample horizontal displacement was designed and used. At both testing scales, the mobilized internal friction angle of MSW decreased considerably as food waste content increased. As food waste content increased from 0% to 40% and from 40% to 80%, the mobilized internal friction angles (estimated using the mobilized peak (ultimate) shear strengths of the small-scale direct shear tests) decreased from 39° to 31° and from 31° to 7°, respectively, while those of large-scale tests decreased from 36° to 26° and from 26° to 15°, respectively. Most friction angle measurements produced in this study fell within the range of those previously reported for MSW.